CALL US:Toll Free - (800)344-8590 Direct - (334)264-6158
Office Hours: Monday-Friday 8am - 5pm CT
Standard shutters are only available in Western Red Cedar.
Heavy Duty and DesignLine shutters are available in Western Red Cedar, Spanish Cedar, Sapele Mahogany, and Cypress, however Western Red Cedar is the preferred choice.
Paint grade is for shutters that will be painted, either by us or by the customer. Stain grade is for shutters that will be stained prior to installation.
Our shutters are sold in pairs. However, if you just need one shutter, simply select 0.5. If you need an odd number of shutters, like 3, select 1.5
Measure the width of the full window. Deduct 1/2” from the measurement and divide by 2 for the panel size. Our complete measuring guide here
Measure the length of the window. Deduct 1/2” from the measurement. Our complete measuring guide here
Shutters are available in a variety of finishes. Our complete finishing guide here
Rail layouts are available in standard configurations or may be specified by placing the rail location from the bottom of the shutter to the bottom of the rail.
The top rail is located at the top of the shutter frame. 3 ¾”is the standard width on Heavy Duty True Louver, Heavy Dudy Raised Panel, Heavy Duty Movable Louver. Customizations are available for an additional charge.
The bottom rail is located at the bottom of the shutter frame. 3 ¾ inch is the standard width. Customizations are available for an additional charge.
The side stiles are located on the left and right of the shutter frame. 2 inch is the standard width. Customizations are available for an additional charge.
Decorative trim molding is surface-mounted to the inside of the stiles.
A Combination Shutter is always a Combination of Louvers and Panels. The selections must be a combination. Please select another option.
Shutters over - void warranty