Premium Composite Shutters are crafted with decay resistant materials and a low-maintenance finish for long-lasting durability. They are made of composite materials, providing both functionality and authenticity.
Our Premium Composite Shutters are designed for use with functional hinges and hardware.
Factory Finished*; Ready for Installation
Each shutter is wiped clean, prepped and prepared for the finish topcoat. Then the shutters are finished with premium Acrylic Urethane Enamel exterior paint.
Composite Shutters are factory finished with a commercial coating that meets or exceeds AAMA specifications 613 & 623.
Vinyl safe Heat Reflective Colorants are required for colors with a (LRV) * light reflective value equal to or greater than 55 (Flat Black = 0, pure white =100).*
* Color finishes by Sherwin Williams, Benjamin Moore, and PPG may be matched by supplying the manufacturer's brand name, color number and color name. Anything else can be matched by swatch.
Fiberglass/Composite Combination Shutters manufactured by Southern Shutter can be customized to meet most customers specifications. For additional options call 1-800-344-8590 or visit our website www.southernshutter.com.
Cutouts and carvings are offered in a wide variety of standard designs.
2 Equal Sections
Raised Panel Over
1-7/8” Fixed Louver Combination
3 Sections with
Small Middle Panel
2 Equal Sections
1-7/8” Fixed Louver
Over Single Sided
Raised Panel
2 Equal Sections
Raised Panel Over
1-7/8” Fixed Louver
Fleur De Lis Cutout
Cottage Layout
Raised Panel over
Fixed Louver
Reverse Cottage
Layout Fixed Louver
over Raised Panel
Cottage Layout
Flat Offset Panel
with V-Groove over
Fixed Louver
2 Equal Sections
Flat Panel over
Fixed Louver
It is important to measure your shutter pocket at the top and the bottom and on both sides, because window frames may not always be square.
Remember to measure and re-measure to verify your numbers before selecting your shutters and the desired mounting proceedure.
Southern Shutter Company offers a complete line of quality hardware for any exterior application.
Our hardware provides the finishintg touch for your functional - as well as decorative shutter installation.
with wood or composite trim with appropriate depth for shutter pocket. Note: Trim board must be as thick as the shutter, plus clearance for shutter rotation.
with appropriate depth for shutter pocket. Note: Strap and Pintel are equal allowing shutter to close flush.
Allowing for closure inside window trim and throwing out and around structure.
with little or no depth for shutter pocket.
