Our shutters are custom built with the highest quality woods available. All of our exterior woods are clear, and without finger joints. Cedar is naturally decay resistant and straight.
Western Red Cedar, Spanish Cedar, Cypress, and Sapele Mahogany.
Sprayed with top quality oil-based primer; light sanding recommended
Sprayed with top quality oil-based primer, sanded and joints sealed; ready for finishing.
Each shutter is sanded, primed with two coats of oil-based primer and sanded again. Then the primed shutters are finished with a premium exterior paint. Custom color charge may be applied to orders less than 60 square feet.
Exterior Paneled Shutters manufactured by Southern Shutter can be customized to meet most customers specifications. Some common applications are shown below. Other options are illustrated on the following pages. For additional options call 1-800-344-8590 or visit our website www.southernshutter.com.
Flush Stile & Rail Raised Panel Shutters with 2 Equal Sections
Flush Stile & Rail V-Groove Raised Panel Shutters
Flush Stile & Rail V-Groove Flat Panel Shutters
Flush Stile & Rail Flat Panel Shutters with 2 Equal Sections
Flush Stile & Rail Raised Panel Shutters with 2 Sections and Quarter Round Arch Top
Flush Stile & Rail Raised Panel Shutters with 2 Sections & Solid Arch Top
Flush Stile & Rail Raised Panel Shutters with 3 Sections & Small Middle Panel
Flush Stile & Rail Raised Panel Shutters with 2 Equal Sections & Decorative Cutout
Flush Stile & Rail Raised Panel Shutters with 2 Equal Sections & Decorative Trim
It is important to measure your shutter pocket at the top and the bottom and on both sides, because window frames may not always be quare.
Remember to measure and re-measure to verify your numbers before selecting your shutters and the desired mounting proceedure.
Southern Shutter Company offers a complete line of quality hardware for any exterior application.
Our hardware provides the finishintg touch for your functional - as well as decorative shutter installation.
with wood or composite trim with appropriate depth for shutter pocket. Note: Trim board must be as thick as the shutter, plus clearance for shutter rotation.
with appropriate depth for shutter pocket. Note: Strap and Pintel are equal allowing shutter to close flush.
Allowing for closure inside window trim and throwing out and around structure.
with little or no depth for shutter pocket.
A Combination Shutter is always a Combination of Louvers and Panels. The selections must be a combination. Please select another option.