Our shutters are custom built with the highest quality woods available. All of our exterior woods are clear, and without finger joints. Cedar is naturally decay resistant and straight.
Western Red Cedar, Spanish Cedar, Cypress, and Sapele Mahogany.
*Additional charges apply.Spray Primed*
Sprayed with top quality oil-based primer; light sanding recommended.
Primed and Sanded*
Sprayed with top quality oil-based primer, sanded and joints sealed; ready for finishing.
Primed and Finished*; Ready for Installation
Each shutter is sanded, primed with two coats of oil-based primer and sanded again. Then the primed shutters are finished with a premium exterior paint. Custom color charge may be applied to orders less than 60 square feet.
* Color finishes by Sherwin Williams, Benjamin Moore, and PPG may be matched by supplying the manufacturer's brand name, color number and color name. Anything else can be matched by swatch.
Exterior Movable Louver Combination Shutters manufactured by Southern Shutter can be customized to meet most customers specifications. Some common applications are shown below. Other options are illustrated on the following pages. For additional options call 1-800-344-8590 or visit our website www.southernshutter.com.
2 Equal Sections Movable Louver Over Raised Panel
2 Equal Sections Movable Louver Over Raised Panel Solid Arch Top
2 Sections Cottage Layout Movable Louver Over Raised Panel
2 Sections Cottage Layout Raised Panel Over Movable Louver
3 Equal Sections Movable Louver Raised Panel Movable Louver
3 Equal Sections Movable Louver Raised Panel Movable Louver
2 Equal Sections Movable Louver Over Raised Panel Rake Top
2 Equal Sections Raised Panel Over Movable Louver
It is important to measure your shutter pocket at the top and the bottom and on both sides, because window frames may not always be square.
Remember to measure and re-measure to verify your numbers before selecting your shutters and the desired mounting proceedure.
Southern Shutter Company offers a complete line of quality hardware for any exterior application.
Our hardware provides the finishintg touch for your functional - as well as decorative shutter installation.
with wood or composite trim with appropriate depth for shutter pocket. Note: Trim board must be as thick as the shutter, plus clearance for shutter rotation.
with appropriate depth for shutter pocket. Note: Strap and Pintel are equal allowing shutter to close flush.
Allowing for closure inside window trim and throwing out and around structure.
with little or no depth for shutter pocket.
